McDATA 3000 manual Bits per sec

Using the Sysclean Command

2.Issue the abort command to bring the UltraNet Edge 3000 to the prom level. Press ENTER as soon as the prom prompt is displayed to stop the boot process at the prom level.

3.Set the terminal emulator settings to the following:

- bits per sec.	38400
- data bits	8
- parity	none
- stop bits	1
- flow control	none

4. Open a terminal emulator to access the serial port.

The following text will appear on the screen:

UltraNet Edge

Copyright (c) 1996-2001 by Computer Network Technology Corporation (CNT).

This material is the proprietary and confidential property of CNT. Any Disclosure, use, or reproduction without the prior written consent of CNT is strictly prohibited. Failure to properly protect this material could subject the recipient of this material to legal action and substantial damages.

All rights reserved.

CNT Edge V1.2.1.1 0 Wed Jan 16 10:40:54 CST 2002 clearcase

For help, type 'help'.

5.At the prompt, type abort. tm.0x10> abort

The UltraNet Edge 3000 will begin to reboot. You will need to stop the autoboot process by hitting any key at the prom> prompt.

The following text will appear on your screen:

Shutting down disk drive C: ...

Drive C: is closed.

*****************************************************

G-2

UltraNet™ Edge Storage Router 3000 User Guide