McDATA 3000 manual Static Mapping, LUNs and Filtering, Source WWN

9

Configuring Tape Device Extension

	If Edge LUN mapping is not necessary, proceed to the
	“Delivering the Configured Network” section in this chapter.
	NOTE: See the examples in the “Network Configuration Examples” section
	to determine if your network needs static LUN mapping and source WWN
	filtering.
Static Mapping the	Use the following procedure to statically map the Edge LUNs and
LUNs and Filtering	add filtering to the source WWN. Use Table 8-4 and Table 8-5
the Source WWN	(page -7) for an example of how the LUNs and WWNs are used in the
	following procedure. For purposes of illustrating an example, the
	screens shown below follow the table information in the “Network
	Configuration Examples” (page -2) section.
Mapping Node 10 to	1. Double-click on the Device Extension interface 10	on
WWNs Accessed by	Node 10.
Node 20	2. Click the Peripheral tab and define the WWNs being accessed by

Node 20 in the WWN field.

9-32 McDATA UltraNet Edge 3000 User Guide