McDATA 3000 manual Removing the Gig-E Short Wave SFP Transceiver

12

Replacing the Gigabit Ethernet Short Wave Transceiver

Removing the Gig-E

Short Wave SFP

Transceiver

Removing the Black

Metal Clasp

Transceiver

Removing the Black

Metal Clasp

Transceiver

Use the removal procedure below that corresponds with the type of transceiver you are removing.

1.Remove the fiber optic cabling from the transceiver.

2.Gently push the red release tab towards the interface card to release the transceiver. To avoid breaking the release tab, be careful to push it straight in.

3.Pull the transceiver out of the interface card.

Release Tab

Sb056

1.Remove the fiber optic cabling from the transceiver.

2.Pull the black metal clasp up and gently pull the transceiver to release it from the interface card.

3.Pull the transceiver out of the interface card.

Removing the Plain

Metal Clasp

Transceiver

Metal Clasp Sb054

1.Remove the fiber optic cabling from the transceiver.

2.Pull the metal clasp up and gently pull the transceiver to release it from the interface card.

12-18 McDATA UltraNet Edge 3000 User Guide