McDATA 3000 manual Path for Fibre, Channel Device, Extension Interfaces, On Node20

9

Configuring Tape Device Extension

18.Click Finish.

Once you have completed the above steps for a basic 1x1 Ethernet 10/100 WAN configuration, your network map should look like the following example:

	19. Continue the configuration process by following the “Creating a
	Data Path for Fibre Channel Device Extension Interfaces” section
	in this chapter.
Creating a Data	After configuring the IP circuit, you need to establish a
Path for Fibre	connection between the Fibre Channel Device Extension interface
Channel Device	10 on Node10 and the Fibre Channel Device Extension interface
Extension Interfaces	20 on Node20.
	At this point, your screen should look like the following example:

9-26 McDATA UltraNet Edge 3000 User Guide