McDATA 3000 manual Configurations, FC/SCSI Tape, Pipelining

2

Typical Configuration of the UltraNet Edge 3000

ATM WAN	1x1 and 2x2 configurations are standard ATM WAN configurations
Configurations	for the UltraNet Edge 3000. The UltraNet Edge 3000 can also be
	configured in a 1x2, 2x1 and 3x1 configurations, but they are not
	supported as standard implementations.
	The 1x1 configuration consists of:
	• One Fibre Channel interface extended over one OC-3 ATM WAN
	• aces extended over one OC-3 ATM WAN
	The 2x2 configuration consists of:
	• Two Fibre Channel interfaces extended over two OC-3 ATM
	WANs
FC/SCSI Tape	The UltraNet Edge 3000 can be configured for FC/SCSI taep
Pipelining	pipelining over in a 1x1, or 2x2 Ethernet or ATM WAN
	configurations.
	The 1x1 configuration consists of:
	• One Fibre Channel Device Extension interface extended over one
	10/100 Ethernet, Gigabit Ethernet, or OC-3 ATM WAN
	The 2x2 configuration consists of:
	• Two Fibre Channel Device Extension interfaces extended over
	two 10/100 Ethernet, Gigabit Ethernet, or OC-3 ATM WANs

2-6 McDATA UltraNet Edge 3000 User Guide