McDATA 3000 manual Configuring Tape Device Extension

Configuring Tape Device Extension

3.Enter the LUN of the tape drive (usually LUN zero) in the LUN field. See Table 8-5 (page -7) and the screen below for an example.

4.Click OK.

5.Double-click on the Device Extension interface 20 on Node

6.Click the Host tab.

7.Click in the Dest WWN/LUN field to map the 1st LUN to node

10.The field turns into a drop-down menu, click anywhere within the field to show the menu.

Configuring Tape Device Extension 9-33

9