McDATA manual McDATA UltraNet Edge 3000 User Guide

5

Configuring a 1x1 Ethernet Wide Area Network

NOTE: If you are configuring a 2x2, the Ethernet Maintenance Interface and both WAN interfaces must be on separate subnets.

1.Select the Nodes tab located on the toolbar between the TreeView Area and the Network Map Area (see Figure 5-2 on page -3).

The Nodes tab displays three drop-down menus, containing the node types for each available UltraNet Edge Series.

2.Click the arrow next to the UltraNet Edge 3000 Series drop-down menu and select the Edge3000 (1x1 - 1 Gbps Ethernet) node type.

3.Click in the Network Map to create an instance of the UltraNet Edge 3000 node.

5-4 McDATA UltraNet Edge 3000 User Guide