McDATA 3000 manual Default is

Configuring Tape Device Extension

The default is 8.

Show Source

WWN LUN 0

Filtering

Discover

LUN Count

Select Fibre

Channel

Topology

12.Configure the Fibre Channel topology by selecting one of the following choices in the Address Type drop-down menu:

Soft — The Fibre Channel topology comes up dynamically as fabric or loop.

Hard — The Fibre Channel topology is forced to come up as a loop.

P2P — The Fibre Channel topology is forced to come up as point-to-point.

13.From the LUN 0 drop-down menu, select either Emulate or Passthru.

Configuring Tape Device Extension 9-35

9