Korg sampler Recording the sounds of a combi- nation, Press the OK button to execute the copy

If you press a key during the pre-count before record- ing, the pattern playback and arpeggio performance will begin simultaneously when recording begins, and will be recorded.

Record the RPPR pattern playback and arpeggio per- formance.

When recording the playback of patterns triggered by

RPPR, the timing of the recorded events may be slightly skewed. If this occurs, try setting “Reso” (Realtime Quantize Resolution) to a setting other than Hi.

8When you are finished performing, press the SEQUENCER [START/STOP] key.

Recording will end, and the sequencer will return to the location at which recording began.

If you made a mistake during your performance or would like to re-record, you can use the Compare func- tion (press the [COMPARE] key) to re-record as many times as you wish.

9If you want to record other tracks, un-check the “Multi REC” or “RPPR” check boxes as necessary.

In step 3, uncheck the “Multi REC” check box to defeat multi-track recording.

In step 5, uncheck the “RPPR” check box to turn off the RPPR function.

Recording the sounds of a combi- nation

Here’s how you can copy the sounds of a combination to multiple tracks, and record your performance.

Make sure that the global MIDI channel (Global P1: MIDI, “MIDI Channel”) is set to 01.

1Create a new song. (☞p.88)

2Execute the page menu command “Copy From Combi.”

A dialog box will appear.

Select the combination that you want to copy (i.e., the copy source).

Press the COMBI BANK [INT-B] key, then press numeric keys [8], [5], and finally press the [ENTER] key. I-B085: Steely Keys will be selected.

We will copy the effect settings of the combination as well, so check the “With Effects” check box.

Since we want to copy the settings of the combination’s eight timbres to tracks 1–8, select Track 1 to 8.

If you have selected Track 1 to 8, you will be able to select “Auto adjust Arp setting for Multi REC.” If you check this check box, the MIDI channel etc. of some of the tracks will automatically be adjusted to ensure that the same sound as was used during recording will be reproduced by the playback when you perform multi- track recording with the arpeggiator turned on.

Depending on the combination settings, it may be necessary to make additional changes to the track set- tings.

In order to use the “Auto adjust Arp setting for Multi REC” function, the combination to be copied must have been written with the ARPEGGIATOR [ON/ OFF] key turned on.

Press the OK button to execute the copy.

Notice that when you execute this command, the “PLAY/REC/MUTE” setting of each track will be set automatically.

Basic functions
Saving data
Loading data
Program	settings
Combination	settings
Producing	songs
Sampling	settings
Creating a	CD
SMF	playback
System	settings
Drum kit	settings
Arpeggiator	settings
Effects	settings
Other	functions

95