Korg sampler, music workstation manual Applying an insert effect to a sample and resampling it, 107

2Record a sample.

The recorded sample will automatically be assigned to the index you created in step 1.

3Repeat steps 1 and 2.

This is an efficient way to record multiple samples. (☞p.39)

Applying an insert effect to a sample and resampling it

The process of applying an insert effect etc. to a sampled sound and then sampling it once again is called “resam- pling.”

1In the P0: Recording, Recording page, assign the sam- ple that you want to resample to “Sample Select.”

When the power is first turned on, the assigned sample will be set to “Orig.Key” C2.

If you want to resample in stereo, set “Sample Mode” to Stereo.

2In P2: Loop Edit, check the “+12 dB” setting.

By making the following settings, you will be able to resample at the optimal level.

If “+12 dB” is not checked:

“Recording Level”: +0.0 (dB)

(P0: Recording, Recording page)

“Auto +12 dB On”: Off (unchecked)

(P0: Recording, Preference page)

If “+12 dB” is checked:

“Recording Level”: –12 dB (dB)

(P0: Recording, Recording page)

“Auto +12 dB On”: Off (checked)

(P0: Recording, Preference page)

3In the P0: Recording, Input/Setup page, set “Resam- ple” to Auto.

Use “Key” to specify the sample that will be resam- pled. Set this to C2.

Since we will not be sampling from an external input,

set “BUS (IFX/Indiv.) Select” to Off for each Input.

4In the P8: Insert Effect, Routing page, set “BUS (IFX) Select” to IFX1.

5In the P8: Insert Effect, Insert FX page, set “IFX1” to

052: Reverb Hall, and turn “IFX On/Off” ON.

Press the C2 key, and verify that reverb is applied.

6Press the SAMPLING [REC] key, and then the SAM- PLING [START/STOP] key.

The sample that is assigned to C2 will play back, and resampling will start.

When the sample finishes playing, resampling will end.

The sample that was created by resampling will auto- matically be assigned to “Sample Select.”

7Press the C2 key, and verify that reverb is applied.

In Sampling mode, the P8: Insert Effect, Routing page “BUS (IFX) Select” parameter will automatically be set to L/R when resampling ends. This prevents an insert effect from being applied in duplicate when you monitor the results of resampling through an insert effect.

If you want to apply an insert effect once again, re- select IFX1.

As an alternative to automatically resampling as described above (“Resample” Auto), you can simply sample the sounds that you play from the keyboard (“Resample” Manual).

Basic functions
Saving data
Loading data
Program	settings
Combination	settings
Producing	songs
Sampling	settings
Creating a	CD
SMF	playback
System	settings
Drum kit	settings
Arpeggiator	settings
Effects	settings
Other	functions

107