Korg music workstation, sampler manual Basic operation, Selecting modes, Selecting pages

Basic operation

1. Selecting modes

In order to use a particular function on the TRITON STUDIO, you must first select the appropriate mode. Press one of the front panel mode keys ([COMBI] key

– [DISK] key) to enter the corresponding mode.

[COMBI] key:	Combination mode
[PROG] key:	Program mode
[SEQ] key:	Sequencer mode
[SAMPLING] key:	Sampling mode
[S.PLAY] key:	Song Play mode
[GLOBAL] key:	Global mode
[DISK] key:	Disk mode

3In the LCD screen, press the desired page.

You will jump to the selected page, and it will appear in the display. As an example here, press P1: Edit-Basic.

• As a reminder, the page that was selected before you pressed the [MENU] key will have its top right corner bent over.

• You can also jump to the corresponding page by pressing a numeric key [0]–[9]. (P0–P9 correspond to numeric keys [0]–[9].)

•By holding down the [MENU] key and pressing a numeric key [0]–[9],

you can jump directly to the corresponding page without displaying the page jump menu.

2. Selecting pages

Each mode has a large number of parameters, which are grouped into pages.

These are further subdivided by tabs into up to eight tab pages.

1Make sure that the desired mode is selected.

To select a mode, press the appropriate mode key ([COMBI] key – [DISK] key).

Here we will use Program mode as an example for our explanation. Press the [PROG] key.

2Press the [MENU] key.

The page jump menu will appear.

In Disk mode there is only one page, so the page jump menu will not appear.

When you press the [EXIT] key, you will return to P0 from any page.

4Press one of the tabs located at the bottom of the page.

As an example here, press the OSC Basic tab which is the second from the left.

• Some pages have no tabs.

5To move to a page with a different ‘P’ number, press the [MENU] key and continue from step 2 of this procedure.

16