GENERAL
Prior to operating heater, make sure the electrical outlet is of the configuration and capacity appropriate for the heater. See outlet configuration on front page of manual. No adapter is available for this blade configuration and none should be used. The outlet pro- vided must be a 240 volts grounded type. When properly installed, it provides a ground connection through the cord of the heater to protect the operator from electric shock. In workshops, locate heater away from sources of wood dust.
NAMEPLATE
FLOOR APPLICATION
The heater is for floor mounting. Place the heater on floor or other flat surface and insert plug into the proper wall outlet.
WARNING !
BE CAREFUL NOT TO DIRECT THE AIRSTREAM AT DRAPERIES, FURNITURE, OR OTHER OBJECTS THAT
MADE IN TAIWAN FOR:
MODEL |
| 482A |
|
| DATE |
|
|
|
|
|
|
|
|
|
|
| |
AMPS |
| 20.0/17.3 |
| VOLTS | |
|
|
|
|
|
|
PH 1
2F68
WK/YY
240/208
Hz 60
MAX.
MIN.
COULD BE DAMAGED BY HEAT. | DO NOT PLACE THE |
HEATER WHERE A SMALL CHILD MAY | FALL OVER THE |
HEATER. DO NOT PLACE THE HEATER WHERE THE POWER CORD MAY BE WALKED ON, TRIPPED OVER, OR OTHER- WISE SUBJECTED TO HARD USAGE.
HEATER OPERATION Set thermostat to its full counterclockwise position. Plug the unit into a properly grounded 240 V outlet.
will cycle automatically around this preset temperature. To increase temperature, turn the thermostat knob clockwise. To lower temperature, turn the thermostat counterclockwise.
CONTINUOUS FAN OPERATION
(MODEL 562A ONLY)
To activate the continuous fan feature, set rocker switch to “ON” position. The elements will continue to cycle on the thermostat set- ting. For no heat, turn thermostat to full counterclockwise position. With fan in “AUTO” position, fan will cycle with the thermostat.
CLEANING AND STORAGE
Turn thermostat off and remove plug from electrical outlet before cleaning heater. Use a soft cloth for dusting. For cleaning, use only a damp rag and
If heater is used in very dusty location, use a vacuum cleaner dust brush to remove dust and other foreign material from the grilles. Always unplug cord and wrap around heater handle when not in use. Move heater to a safe location for storage.
SERVICE
This heater does not require any routine maintenance other than occasional cleaning to prevent clogging of intake grille opening. To clean air intake grille, use vacuum with brush attachment or high pressure air. The motor is permanently lubricated. Do not operate the heater with a damaged cord or plug or if the heater malfunctions or has been damaged in any manner. Return heater to authorized service facility for examination, electrical, or mechanical adjust- ment, or repair. Call the toll free number listed for assistance in locating the Marley authorized service center in your area.
WARNING !
OPERATION OF THE SAFETY THERMAL LIMIT CONTROL INDI- CATES THE HEATER HAS BEEN SUBJECTED TO SOME ABNOR- MAL CONDITIONS. IT IS RECOMMENDED THAT THE HEATER
BE CHECKED BY A REPUTABLE ELECTRICIAN OR REPAIR SER- VICE TO INSURE THE HEATER HAS NOT BEEN DAMAGED.
| 12/01 |
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from accident, misuse, or alteration; nor where the con- nected voltage is more than 5% above the nameplate voltage; nor
to equipment improperly installed or wired or maintained in viola-
tion of the product’s installation instructions. All claims for war- ranty work must be accompanied by proof of the date of installa- tion.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley autho- rized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WAR-
RANTIES EXPRESSED OR IMPLIED. AND ALL IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE WHICH EXCEED THE AFORESAID
EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND
EXCLUDED FROM THIS AGREEMENT. MARLEY ENGI-
NEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSE-
QUENTIAL DAMAGES ARISING WITH RESPECT TO THE
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT,
STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, con- tact Marley Engineered Products in Bennettsville, SC, at
ing return authorization, include all catalog numbers shown on the products.
| How to order repair parts: |
|
|
| ||
| In order to obtain any needed repair or replacement parts, war- |
|
|
| ||
| ranty service or technical information, please contact the Marley |
|
|
| ||
| Engineered Products Service Center |
|
|
| ||
|
|
|
| |||
| When ordering replacement parts, always give the information |
|
|
| ||
| listed as follows: |
|
|
|
| |
|
|
|
|
| ||
|
|
|
| |||
|
| 1. The Part Number |
|
|
|
|
|
| 2. The Model Number |
|
|
|
|
|
| 3. The Part Description |
| SPX Corporation | ||
|
| 4. Date of Manufacture | 470 Beauty Spot Rd. East | |||
2 |
| Bennettsville, SC 29512 USA | ||||
|
|
| ||||
