Korg sampler, music workstation manual 113, Press the Save button to save the data

3Select the page menu command “Time Slice.” The Set Sample Tempo dialog box will appear.

4Specify the number of quarter-note beats in the sam- ple, and its tempo.

If you know the BPM, set “Source BPM.”

If you do not know the BPM, set “Beat” and the BPM will be calculated automatically. Since in this example we know the beat, set “Source BPM” to 120.

5Press the OK button.

The sample will automatically be sliced, and a dialog box will appear.

When you play the keyboard, C2 will play the original sample (Source), and D2 and subsequent keys will play the divided samples.

While listening to each divided sample, adjust “Sensi- tivity” so that each drum strike or other rhythm instru- ment sound is divided into its own sample. In some cases, it may not be possible to slice the sample cleanly even if you adjust “Sensitivity.” If the attack of the next sound is included in the end of the preceding sample, or if one sample contains two notes, you will need to edit the samples.

If you want to edit, hold down the [ENTER] key and select the “Index” that is assigned to the note that you want to edit. (This portion of the waveform display will be highlighted.) Then you can make adjustments by adjusting “Start” or “End,” and by using Divide to separate or Link to combine. (☞PG p.110)

6Press the Save button.

The Save Samples & MS dialog box will appear.

Here you can save the time-sliced samples and the multisample.

At this time, set the items in the Save With area to spec- ify the conversion destination for the program that will use the samples and multisample, and for the perfor- mance data (track or pattern) that will be used in Sequencer mode to “recreate” the rhythm loop sample.

•If you want to create the performance data in a track Turn “Program” and “Seq.Event” On (checked) Program: I-E101

Track: On

Song: 000, Track: 01, Meter: 4/4

Start Measure: 001, Time: 008

Press the Save button to save the data.

You will return to the dialog box of step 5.

•If you want to create the performance data in a pattern

In order to audition the performance data as it would be if created as a pattern, press the Save button once again to access the Save Samples & MS dialog box.

Turn “Program” and “Seq.Event” On (checked) Program: I-E102

Pattern: On

Song: 001, Pattern: U00, Meter: 4/4

RPPR: On (checked), Key: C#2, Track: 01

Press the Save button to save the data.

You will return to the dialog box of step 5.

7Press the Exit button to return to the screen of step 2.

8Press the [SEQ] key to enter Sequencer mode, and select 000 for “Song Select.”

The following song data has been set/created automat- ically as you specified in step 6.

Basic functions
Saving data
Loading data
Program	settings
Combination	settings
Producing	songs
Sampling	settings
Creating a	CD
SMF	playback
System	settings
Drum kit	settings
Arpeggiator	settings
Effects	settings
Other	functions

113