Korg sampler, music workstation manual Front and rear panel, Front panel

Front and rear panel

Front panel

					8
	16	4	5	6	9		12
1
2
3
17	18	19		7	10	11	13	14	15

Basics Connections LCD screen Front & Features rear panelIntroduction

1. [SW1] key, [SW2] key

These keys are on/off switches, their function can be assigned in Program, Combination, Sequencer, Song Play, and Sampling modes. When on, the LED will light (☞p.25).

2. Joystick

This controls pitch and modulation.

Move the joystick up/down and left/right (+Y, –Y, –X, +X) to vary the effect (☞p.25).

Various program parameters and effect parameters will determine what is being controlled by the joystick.

3. Ribbon controller

Slide your finger to the left or right on this ribbon control- ler to control the pitch or modulation (☞p.26).

Various program parameters and effect parameters will determine what is controlled by the ribbon controller.

Use the [REALTIME CONTROLS] key to select A or B mode for the realtime controllers, and use knobs [1]–[4] to control the tone, effects, and MIDI control changes etc. in realtime (☞p.26).

[REALTIME CONTROLS] key

This key selects either A or B mode for the realtime con- trollers. The selected mode will light.

[1] knob, [2] knob, [3] knob, [4] knob

In A mode, the function of each knob is fixed. [1] is the low pass filter cutoff frequency, [2] is the filter resonance level or the cutoff frequency of the high pass filter, [3] is the filter EG intensity, and [4] is the filter/amp release time.

In B mode, each knob will control the function that was assigned to it in the Program, Combination, Sequencer, Song Play, or Sampling modes.

4. [VOLUME] slider	6. Mode keys
	Use these keys to enter the desired mode.
This adjusts the volume that is output from the AUDIO
	When you press a key, the LED will light, and you will
OUTPUT (MAIN) L/MONO, R jacks and the headphone
	enter the mode whose key you pressed (☞p.16).
jack.
5. REALTIME CONTROLS	[COMBI] key
	Combination mode will be selected.
	[PROG] key
	Program mode will be selected.
	[SEQ] key
	Sequencer mode will be selected.

3