Korg music workstation, sampler Effect settings in Sampling mode, 142, Master effects Master EQ

Master effects

Master EQ

These settings can be made in the same way as in “Effect settings for a program” (☞p.141).

Effect settings in Sampling mode

In Sampling mode, you can apply an insert effect to an external audio source that is input from AUDIO INPUT 1, 2, S/P DIF IN, or mLAN (if the EXB-mLAN option is installed), or to audio from an audio CD (if the CDRW-1 option is installed), and sample the result. You can also apply an insert effect to the samples assigned to a multi- sample, and resample the result.

Routing

1Use “Input (SAMPLING)” to specify the external audio input, and set the Sampling P0: Recording, Input/Setup page “BUS (IFX/Indiv.) Select” parame- ter to specify the bus (i.e., the insert effect) to which the signal will be sent. (☞p.39)

The Input settings allow you to input simultaneously from each input source.

The bus (the insert effect) to which the samples assigned to the multisample will be sent is specified by the Sampling P8: Insert Effect, Routing page “BUS Select (Indiv.Out Assign)” parameter. (☞p.107)

Insert effects

Select an effect for IFX1–IFX5, and set “Pan (CC#8)” for the signal that has passed through each insertion effect. If effects are chained, the settings after the last IFX in the chain will be used.

Master effects

Master EQ

The master effects and master EQ cannot be used in Sam- pling mode.

142