Korg sampler Using the arpeggiator in Combi- nation mode, Select the arpeggiators that will run

Synchronizing the arpeggiator to your key- board timing

You can specify whether the arpeggio will begin at the moment you play the keyboard, or whether it will always play in synchronization to the MIDI clock tempo.

Press the “Key Sync.” check box in the LCD screen to make this setting.

Checked: When you take your hand completely off of the keyboard and then play the first note-on, the arpeg- gio pattern will start from the beginning. This setting is suitable when you want the arpeggio to start from the beginning of the measure as you are playing in real- time.

Unchecked: The arpeggio will always be synchronized to the MIDI clock tempo.

Sounding both the arpeggio notes and the notes you play

Press the “Keyboard” check box to make this setting.

Checked: The notes you play on the keyboard and the notes played by the arpeggiator will both sound. Unchecked: Only the arpeggiated notes will sound.

Using the arpeggiator in Combi- nation mode

In Combination mode the TRITON STUDIO provides dual arpeggiators, allowing you to run two arpeggio pat- terns simultaneously.

1Press the [COMBI] key to enter Combination mode, and select a combination. (“Selecting and playing a combination” ☞p.24)

As you select various combinations, you will notice that the ARPEGGIATOR [ON/OFF] key LED will light for some combinations. (“Linking the arpeggiator to program, combinations” ☞p.32) When you press the keyboard, the arpeggiator will start.

For other combinations, you can press the ARPEGGIA- TOR [ON/OFF] key (the LED will light) to turn on the arpeggiator.

2As described in the preceding section “Settings using controllers” and the following section “Settings in the LCD screen,” move the controllers or modify the parameters to change the way in which the arpeggios are played.

The ARPEGGIATOR [ON/OFF] key, ARPEGGIATOR [TEMPO] knob, ARPEGGIATOR [GATE] knob, and ARPEGGIATOR [VELOCITY] knob will apply to both arpeggiators A and B. Their state is saved when the combination is written.

Settings in the LCD screen

In Combination P0: Play, press the Arpegg. A tab.

Timbre Assign

Quick Start
Power on/off
Demo song
Playing	programs
Playing	combinations
Using	controllers
Arpeggiator
RPPR
Program	editing
Combination	editing
Sampling

Select the arpeggiator(s) that will run

Use the “Arpeggiator Run” check boxes to specify the arpeggiator(s) that you want to have running. The arpeg- giator(s) that are checked here will operate when the ARPEGGIATOR [ON/OFF] key is on. However, the arpeggiator will play a timbre only if the table displayed next to the check boxes assigns arpeggiator A or B to a T (timbre) 1–8. These settings are made in Combination P7: Edit-Arp., Setup page “Arpeggiator Assign” (☞p.132).

Arpeggiator-A, Arpeggiator-B

For each arpeggiator A and B, you can make settings for “Pat (Pattern Select),” “Reso (Resolution),” “Octave,” “Sort,” “Latch,” “Key Sync,” and “Keyboard.” (☞p.130)

Song

31