Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Command, Alias

Built-in Commands

command

Description: Briefly describes the command and its uses.

Syntax: Shows the required command format. It indicates where arguments, if any, must be specified.

Options: Lists any additional fields in the appropriate format that may be added to the command.

Example: Shows an example of the command.

11.2 BUILT-IN COMMANDS

The built-in commands listed in this section activate functions on the LM managed device or devices being accessed through Network Tools.

alias

Description: Enables, disables and configures alias snooping on a per-port basis.

Syntax: alias [enable disable status] [ALL port # port range, i.e., 1-5] alias [stats]

alias [clear_stats] alias [fwd_list]

alias [fwd_set] [rate burst] [value]

Options: enable – Enables alias snooping on specific port or port range. disable – Disables alias snooping on specified ports or port range

status – Displays the current alias snooping state (enabled or disabled) on a port or port range.

stats – Displays current alias snooping state statistics.

clear_stats – Clears all alias snooping statistics.

fwd_list – Lists current configuration settings including max frame size, max host queue, max PPS, and max burst.

fwd_set – Allows setting of max PPS and/or max burst configuration settings.

11-4Network Tools Screens