Enterasys Networks 2H252, 2E253, 2H253, 2H258 manual Changing Source Vlan and Destination Ports

VLAN Redirect Configuration Screen

5.7.1Changing Source VLAN and Destination Ports

To add or delete source VLAN and destination port entries and set the Frame Format, proceed as follows:

1.Use the arrow keys to highlight the Source VLAN field near the bottom of the screen.

2.Type in the VLAN ID number of the source VLAN to be configured.

3.Use the arrow keys to highlight the Destination Port field near the bottom of the screen.

4.Use the SPACE bar or BACKSPACE key to step to the appropriate port number for the destination port.

5.Use the arrow keys to highlight the Frame Format field near the bottom of the screen.

6.Use the SPACE bar or BACKSPACE key to step to the appropriate frame format setting (RECEIVED, TAGGED, or UNTAGGED) for the selected Destination Port.

7.Use the arrow keys to highlight the Status field.

8.Use the SPACE bar to select either the ADD or DEL (delete) option. Press ENTER. This adds or deletes the selections for the Source VLAN, Destination Port, and Frame Format made in steps 1 through 6 and also updates the screen.

TIP: If more than 1 port is being redirected, repeat steps 1 through 8 for each additional setting. Then go to step 9 to save all the new settings at once.

If an entry is to be changed, delete the entry, save the screen, then recreate the entry with its new settings.

Any combination, up to 128, of port redirect instances (configured on the Port Redirect Configuration screen) and/or VLAN redirect instances (configured on the VLAN Redirect Configuration screen) can be configured.

9.Use the arrow keys to highlight SAVE at the bottom of the screen. Press ENTER. The message “SAVED OK” displays. This saves the new settings and updates the Source Port and Destination Port read-only fields.

5-22Port Configuration Menu Screens