Enterasys Networks 2H253, 2E253, 2H252, 2H258 manual Setting the Reset Peak Switch Utilization

System Resources Information Screen

Field Descriptions

Refer to Table 4-8for a functional description of each screen field.

Table 4-8 System Resources Information Screen Field Descriptions

Use this field…	To…
CPU Type	See which microprocessor is used in the device.
(Read-Only)
Flash Memory	See the amount of FLASH memory that is installed in the device and
Installed	how much is currently available.
(Read-Only)
DRAM Installed	See the amount of DRAM installed in the device and how much of it is
(Read-Only)	currently available.
NVRAM Installed	See the amount of NVRAM that is installed in the device and how
(Read-Only)	much of it is currently available.
Current Switch	See what percentage of the device switching capacity is currently being
Utilization	used.
(Read-Only)
Peak Switch	See the peak percentage of device switching capacity used, since the
Utilization	last reset.
(Read-Only)
Reset Peak Switch	Reset the Peak Switch Utilization field. The switch may be set to either
Utilization	YES or NO as described in Section 4.7.1. YES resets the Peak Switch
(Toggle)	Utilization field to the current system utilization.

4.7.1Setting the Reset Peak Switch Utilization

To set the Reset Peak Switch Utilization field to YES or NO, proceed as follows:

1.Use the arrow keys to highlight the Reset Peak Switch Utilization field.

2.Press the SPACE bar to select YES or NO.

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” displays and the Reset Peak Utilization counter resets to zero.

Device Configuration Menu Screens 4-29