Protocol Port Configuration Screen

Field Descriptions

Refer to Table 7-10for a functional description of each screen field.

Table 7-10 Protocol Port Configuration Screen Field Descriptions

Use this field …

To …

 

 

 

 

 

 

 

Classification Rule

See the VID, Classification, and Definition of the line selected in the

Field

VLAN Classification Configuration screen. For example, in

(Read-Only)

Figure 7-9, VID 1, Ether II Type, 0x0800 (DOD IP) was selected in the

 

VLAN Classification Configuration screen to access the Protocol Port

 

Configuration screen. All ports with YES in the Classify columns

 

indicate that they are associated with VID 1 and the Ether II Type

 

Classification. This causes the VLAN 1, Ether II Type frames that are

 

received to be classified into VID 1.

 

This will cause Ether II of type 0x0800 (DOD IP) frames to be

 

transmitted out all ports set to YES as frames belonging to VLAN 1.

 

 

 

 

 

 

 

Port

See the number of each port.

(Read-Only)

 

 

 

 

 

 

 

 

 

 

 

 

 

Classify

See which ports are set to the VID/Classification displayed in the

(Toggle)

Classification Rule field above the Port and Classify column headings.

 

This field toggles between YES and NO, which determines whether or

 

not the associated port is set to the VID/Classification indicated in the

 

Classification Rule field.

 

 

 

 

 

 

NOTE: As each Classify field is highlighted, the Event

 

 

 

 

 

 

 

 

 

 

 

 

Message Line (not shown) at the top of the screen indicates

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the port type. For example: Fast Ethernet Front Panel, FTM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Backplane Port 3, and Gigabit Ethernet VHSIM.

 

 

 

 

 

 

 

 

 

 

 

 

If a port cannot be configured, NO will be displayed without

 

 

 

 

 

 

brackets.

 

 

 

 

 

 

In some cases the Classify field [NO] may have an asterisk

 

 

 

 

 

 

next to it. The asterisk indicates this classification rule is

 

 

 

 

 

 

active as a result of application by policy.

SET ALL PORTS Set all ports to the VLAN and Classification shown in the

(Toggle)Classification Rule field. The SET ALL PORTS field toggles between NO and YES with NO as the default setting. YES associates all ports set to YES to the VID/Classification shown in the Classification Rule field.

7-36802.1Q VLAN Configuration Menu Screens

Page 224
Image 224
Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Classification Rule, Field, Classify