Enterasys Networks 2H258, 2E253, 2H253, 2H252 manual Classification, Description, Del All/Del, Marked

VLAN Classification Configuration Screen

Table 7-7 VLAN Classification Configuration Screen Field Descriptions (Continued)

Use this field …	To …
Classification	See the classification associated with the VLAN in the VID column.
– top of screen	This field may be selected after the screen is saved to call up the
(Selectable)	Protocol Port Configuration screen.
Description	See a brief description of the classification.
(Selectable)
VID	Enter a VLAN Identification (VID) to be associated with the
– bottom of screen	classification selected in the Classification field. For details on how to
(Modifiable)	enter the VID/Classification, refer to Section 7.8.3.
CLASSIFICATION	Select the classification that will be associated with the VLAN entered
– bottom of screen	in the VID field. There can be up to three fields involved
(Selectable)	(CLASSIFICATION, IP ADDRESS, and MASK), depending on the
	classification selected. At the time of this printing, the selections
	available in each field are listed in Table 7-8.
		NOTE: Besides the VID selected, the order in which a frame is
		transmitted also depends on the Classification Precedence
		Rules discussed in Section 7.8.1. These rules come into effect
		when there are multiple classifications configured in the
		SmartSwitch device.
	For details on how to use the VLAN Classification Configuration
	screen to select the classification rule, refer to Section 7.8.3.
ADD	Add the current Classification Rule (VID and Classification selections)
(Command)	to the screen. For details about how to add an entry, refer to
	Section 7.8.3.
DEL ALL/DEL	Delete all or one or more marked Classification Rule entries on the
MARKED	screen. The DEL ALL command is the default and it is used to
(Command)	simultaneously delete all the configured Classification Rules. The DEL
	MARKED command appears in place of the DEL ALL command
	when one or more lines are marked for deletion. For details on using
	the two commands, refer to Section 7.8.4.

802.1Q VLAN Configuration Menu Screens 7-23