Enterasys Networks 2H252, 2E253, 2H253, 2H258 manual Protocol Port Configuration Screen

Protocol Port Configuration Screen

4.After the lines are marked, use the arrow keys to highlight the DEL MARKED command field.

5.Press ENTER. The marked line items are deleted and the DEL MARKED command is changed back to DEL ALL.

8.7PROTOCOL PORT CONFIGURATION SCREEN

When to Use

To display the ports associated with the line item (Classification Rule) selected in the Priority Classification Configuration screen described in Section 8.6. Each port can be changed so it will or will not transmit frames according to the Classification Rule.

How to Access

Use the arrow keys to highlight the line of interest (Classification Rule) under the Priority/Protocol Type/Configured Ports columns on the Priority Classification Configuration screen and press ENTER. The Protocol Port Configuration screen, Figure 8-8, displays. The Classification Rule used to access this screen is displayed in the Classification Rule field shown in Figure 8-8.

Screen Example

Figure 8-8 Protocol Port Configuration Screen

Classification Rule Field

1	Ether II Type	0x0800 (DOD IP)
Port	Classify	Port	Classify	Port	Classify	Port	Classify
–––	––––––	–––	––––––	–––	––––––	–––	––––––
1	[NO ]	9	[NO ]	17	[NO ]	25	[NO ]
2	[NO ]	10	[NO ]	18	[NO ]	26	[NO ]
3	[NO ]	11	[NO ]	19	[NO ]	27	[NO ]
4	[NO ]	12	[NO ]	20	[NO ]	28	[NO ]
5	[NO ]	13	[NO ]	21	[NO ]	29	[NO ]
6	[NO ]	14	[NO ]	22	NO	30	[NO ]
7	[NO ]	15	[NO ]	23	[NO ]	31	[NO ]
8	[NO ]	16	[NO ]	24	[NO ]	32	[NO ]

SET ALL PORTS: [NO ]

SAVE NEXT PREVIOUS EXIT

RETURN

30691_47

8-32802.1p Configuration Menu Screens