Enterasys Networks 2H252, 2E253, 2H253, 2H258 manual Screen ExampleNetwork Tools Help Screen

Network Tools

Screen ExampleNetwork Tools Help Screen

Welcome to Network Tools
->help
Commands Available to the User:
Built in Commands:
arp	bridge	defroute
netstat	ping	reset
show	traceroute
ev	radius	soft_reset
telnet	link_trap	cdp
arp_learn	non_bridge_if_num	timed_soft_reset
timed_reset	stpPort	stpEdgePort
stpForceVersion	stpPointToPointMAC	stpRealTimeMsgAge
stpLegacyPathCost	passiveStp	vrrpPort
lg_frame_admin	sat_size	loopback_detect
igmpv3_drop	rate_limit_mode	alias
dynamic_egress	maclock	policy
suppress_topology_traps
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
		36502_02

The Network Tools functions are performed using a series of commands. Entering commands in Network Tools involves typing the command to be executed at the Network Tools prompt, adding any desired or required extensions, and pressing ENTER.

There are two categories of commands in the command set: Built-in and Special, which are described below and detailed in Sections 11.2 and 11.5.

•Built-in Commands – Allow you to access and manage network devices.

NOTE: The atm_stp_state command only displays when an HSIM or VHSIM is installed that supports ATM, such as the HSIM-A6DP or VHSIM2-A6DP.

11-2Network Tools Screens