Enterasys Networks 2H253, 2E253, 2H252, 2H258 manual Setting Egress Types on Ports

Static VLAN Egress Configuration Screen

7.4.1Setting Egress Types on Ports

The following procedures describe how to assign the egress type to one or more ports, or set one egress type to all ports simultaneously.

Setting the Egress Type on One or More Ports Individually

1.Use the arrow keys to highlight the Egress field adjacent to the Port number. The port type is displayed (i.e., Fast Ethernet Frontpanel, Gigabit Ethernet VHSIM, etc.) at the top of the screen.

2.Press the SPACE bar to step to the appropriate Egress field (UNTAGGED, TAGGED, or NO) for the port.

UNTAGGED – sets the port to transmit the VLAN frames without a tag header.

TAGGED – sets the port to transmit frames with a tag header to associate the frame with the VLAN.

NO – the port supports tagging, but is shut down so that no frames of the VLAN are transmitted.

3.To change the egress type on more than one port, repeat the first two steps for each port.

4.After the changes are complete, use the arrow keys to highlight the SAVE command at the bottom of the screen.

5.Press ENTER. The message “SAVED OK” displays and the settings are saved.

Setting the Same Egress Type on All Ports Simultaneously

1.Use the arrow keys to highlight the SET ALL PORTS field. The following message displays at the top of the screen:

TOGGLE TO DESIRED SELECTION AND HIT <RETURN> TO PROPAGATE SELECTION TO PORTS

2.Press the SPACE bar to step to the appropriate egress type (UNTAGGED, TAGGED, or NO). and press ENTER.

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” displays and the screen refreshes showing all ports associated with the VLAN that are set to the selected egress type.

802.1Q VLAN Configuration Menu Screens 7-13