Enterasys Networks 2H252, 2E253, 2H253, 2H258 manual PartnerOperState

Link Aggregation Menu Screen (802.3ad Main Menu Screen)

Table 5-9 802.3ad Port Details Screen Field Descriptions (Continued)

Use this field…	To…
ActorOperState	bit 5 Distributing, 1 indicates that we are Distributing.
(Read-Only) (Continued)	“Distributing” means that a port is ready to transmit
	traffic. If Distributing is true a ‘D’ is displayed,
	otherwise a ‘-’ is displayed in this bit position.
	bit 6 Defaulted, 1 indicates that we have deFaulted.
	If no protocol partner is available a port will resort to
	using default information about its partner. When this
	happens a port is said to be defaulted. If this bit is 1 an
	‘F’ is displayed, otherwise a ‘-’ is displayed in this bit
	position.
	bit 7 Expired, 1 indicates that we have Expired.
	This indicates that no LACP PDUs have been received
	for a sufficient length of time so the partner
	information has expired. If this is true, an ‘E’ is
	displayed, otherwise a ‘-’ is displayed in this bit
	position.
PartnerAdminKey	Set a default value to use for PartnerOperKey when no
(Modifiable)	protocol partner is available.
PartnerAdminState (hex)	Set a default value to use for PartnerOperState when no
(Modifiable)	protocol partner is available.
PartnerOperKey	See a default value to use for PartnerOperState when no
(Read-Only)	protocol partner is available.
PartnerOperState	See current state value of the partner port (same bits as the
(Read-Only)	ActorOperState).
SelectedAggID	See the instance of the aggregator that this port has selected.
(Read-Only)
AttachedAggID	See the instance of the aggregator to which this port is
(Read-Only)	attached.

5-34Port Configuration Menu Screens