Enterasys Networks 2H258, 2E253, 2H253, 2H252 manual Configuration File Upload Using Tftp

FLASH Download Configuration Screen

3.Use the arrow keys to highlight the TFTP Gateway IP Addr field.

4.Set the IP address of the TFTP gateway (this defaults to the same IP address as that set in the TFTP Gateway IP Addr field on the General Configuration screen).

5.Use the arrow keys to highlight the Download Server IP field.

6.Enter the IP address of the TFTP server using the DDN format. For example: nnn.nnn.nnn.nnn

7.Use the arrow keys to highlight the Download File Name field.

8.Enter the complete pathway and file name of the image stored on the download server.

9.Use the arrow keys to highlight EXECUTE at the bottom of the screen and press ENTER. The message “DOWNLOADING CONFIGURATION. REBOOT WILL OCCUR WHEN DOWNLOAD COMPLETES.” displays in the event message line at the top of the screen and the configuration file is downloaded to the device from the TFTP server.

4.8.3Configuration File Upload Using TFTP

To upload a configuration file to a TFTP server, proceed as follows:

1.Use the arrow keys to highlight the Download Method field.

2.Use the SPACE bar to select UPLOAD CONFIG.

NOTE: When UPLOAD CONFIG is selected, the Reboot After Download field is automatically set to NO (and cannot be changed).

3.Use the arrow keys to highlight the TFTP Gateway IP Addr field.

4.Set the IP address of the target TFTP server which is to receive a copy of the device configurable settings.

5.Use the arrow keys to highlight the Download Server IP field.

6.Enter the IP address of the target TFTP server using the DDN format. For example: nnn.nnn.nnn.nnn

7.Use the arrow keys to highlight the Download File Name field.

8.Enter the complete pathway and file name of the configuration file in the device.

Device Configuration Menu Screens 4-35