Enterasys Networks 2H253 Character string for the shared secret code. For security, Radius client

			Built-in Commands
radius (Continued)
Options:	radius prim_secret — Sets the primary RADIUS server’s shared secret.
(Cont’d)	radius sec_secret — Sets the secondary RADIUS server’s shared secret.
		NOTES: The secret is NOT encrypted in transit; if this command is
		used over TELNET then the secret may be compromised.
		Examples:For maximum security, it is recommend to use a 16 to
		32 character string for the shared secret code. For security
		reasons, the entered code appears as asterisks (*) on the screen.
Examples:	->radius client
	RADIUS Configuration Cli
	Command Format : radius
	status		(shows Radius status)
	clear		(clears all entries)
	timeout		(server timeout, seconds)
	last_resort		<localremote> <acceptrejectchallenge>
	retry		<number of retry attempts>
	enable		(enables radius client)
	disable		(disables radius client)
	prim_secret		(sets primary secret)
	prim_ip		<primary server IP>
	prim_auth_port		<primary server authentication port>
	prim_acct_port		<primary server acct port>
	sec_secret		(sets secondary secret)
	sec_ip		<secondary server IP>
	sec_auth_port		<secondary server authentication port>
	sec_acct_port		<secondary server acct port>

Network Tools Screens 11-25