Enterasys Networks 2H253 Reboot After, Download Server IP, Download File, Last Image Server

FLASH Download Configuration Screen

Table 4-9 Flash Download Configuration Screen Field Descriptions (Continued)

Use this field…	To…
Reboot After	Set the device so it will either reboot or not reboot after completing the
Download	download of an image. This field toggles between YES and NO, when
(Toggle)	the Download Method field is set to RUNTIME.
	If YES is selected, the device reboots after the download is completed.
	If NO is selected, the device continues using the existing firmware
	image and stores the new firmware image in FLASH memory. The next
	time the device is reset or powered-up, the device boots from FLASH
	memory using the new image.
	When the Download Method field is set to DOWNLOAD CONFIG,
	the setting defaults to YES and cannot be changed. In UPLOAD
	CONFIG, the setting defaults to NO and cannot be changed.
TFTP Gateway IP	Enter the IP address of the TFTP gateway server defined on the
Addr	General Configuration screen in Section 4.2.4.
(Modifiable)
Download Server IP	Select the IP address of the TFTP server to be used for the download or
(Modifiable)	upload.
Download File	Select the complete TFTP server path and file name of the new image
Name	or configuration file.
(Modifiable)
Last Image Server	See the IP address of the server used for the previous download or
IP	upload.
(Read-Only)
Last Image File	See the complete path and file name of the last downloaded image.
Name
(Read-Only)
Transfer Status	See the status of the current or most recent download or upload.
(Read-Only)

Device Configuration Menu Screens 4-33