Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Assigning Ports to a PID/Classification

Protocol Port Configuration Screen

8.7.1Assigning Ports to a PID/Classification

To assign one or more ports, or all ports simultaneously, to a PID/Classification (Classification Rule), proceed as follows:

Assigning One or More Ports Individually

1.Use the arrow keys to highlight the Classify field adjacent to the Port number.

2.Press the SPACE bar to toggle the Classify field to either NO or YES. YES associates the port to the priority shown in the Classification Rule field.

3.If more than one port is being set, repeat the first two steps for each port.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

5.Press ENTER. The message “SAVED OK” displays and the settings are saved.

Assigning All Ports Simultaneously

1.Use the arrow keys to highlight the SET ALL PORTS command field.

2.Press the SPACE bar to toggle the SET ALL PORTS field to YES or NO and press ENTER. This setting determines whether or not all the ports are set to the PID/Classification shown in the Classification Rule field.

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” displays and the setting is saved.

8-34802.1p Configuration Menu Screens