Enterasys Networks 2H258, 2E253, 2H253, 2H252 manual Displaying Port Statistics, Lagid, Stats

Link Aggregation Menu Screen (802.3ad Main Menu Screen)

Table 5-9 802.3ad Port Details Screen Field Descriptions (Continued)

Use this field…	To…
LAGID	See the complete link aggregation group identifier for the
(Read-Only)	port. Ports with identical LAGIDs will be connected to the
	same aggregator. The various PartnerAdmin values are
	copied into the corresponding PartnerOper fields when no
	protocol partner is present (see RecordDefault in the AD
	spec). This allows for manual configuration of groups when
	no protocol partner is present.
STATS	Open the 802.3ad Port Statistics screen described in
(Command)	Section 5.8.1.2 to display the current statistics of the port
	displayed in the Port Instance field.

Viewing and Editing 802.3ad Port Parameters

To change a parameter, proceed as follows:

1.Use the arrow keys to highlight the parameter field to be modified and type in the new value. Press ENTER. Repeat this step to change other parameter settings as necessary before saving the new settings.

2.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

3.Press ENTER. The message “SAVED OK” displays. All settings are saved.

Displaying Port Statistics

To display statistical information about the port displayed in the Port Instance field, proceed as follows:

1.Use the arrow keys to highlight the STATS command at the bottom of the screen.

2.Press ENTER. The 802.3ad Port Statistics screen described in Section 5.8.1.2 is displayed, showing the current port statistics.

Port Configuration Menu Screens 5-35