Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Displaying Interface Statistics, Mtu

Interface Statistics Screen

Table 10-3 Interface Statistics Screen Field Descriptions (Continued)

Use this field…	To…
Last Change	See the last time that the interface was reset.
(Read-Only)
Admin Status	See the current status of the interface. If this field displays “Testing”,
(Read-Only)	no frames may be passed on this interface.
Oper Status	See the current status of the interface. If this field displays “Testing”,
(Read-Only)	no frames may be passed on this interface.
MTU	See the maximum frame size (in octets) that a frame may contain to be
(Read-Only)	received or transmitted from this interface.
Speed	See the theoretical maximum of the interface’s bandwidth in bits per
(Read-Only)	second.
Interface [nn]	Enter an interface number for viewing statistics. For instructions on
(Command)	how to use this command, refer to Section 10.3.1.
CLEAR	Temporarily reset all counters of a screen to zero to allow the user to
COUNTERS	observe counter activity over a period of time. For details on how to use
(Command)	this field, refer to Section 3.1.4.

10.3.1 Displaying Interface Statistics

To display the statistics for any interface, proceed as follows:

1.Use the arrow keys to highlight the Interface [nn] field at the bottom of the screen.

2.Press the SPACE bar to increment (or press the DEL [delete] key to decrement) the interface number.

3.Press ENTER (neither the Interface # fields nor the statistics will change until ENTER is pressed).

10-8Device Statistics Menu Screens