Static VLAN Egress Configuration Screen

7.4STATIC VLAN EGRESS CONFIGURATION SCREEN

When to Use

To set the type of egress (tag status) for each or all ports associated with a VLAN selected from the Static VLAN Configuration screen. The ports can be set using the following selections:

UNTAGGED – sets the port to transmit frames without a tag header. This setting is usually set to configure a port connected to an end user device.

TAGGED – sets the port to transmit frames with a tag header to associate the frame

with the VLAN. This setting is usually to configure a port as a trunk port to another switch.

NO – sets the port so it does not transmit frames (tagged or untagged) of the VLAN.

How to Access

Use the arrow keys to highlight the line item with the VLAN ID of interest on the Static VLAN Configuration screen and press ENTER. The Static VLAN Egress Configuration screen, Figure 7-4, displays.

Screen Example

Figure 7-4 Static VLAN Egress Configuration Screen

VLAN ID: 2

FDB ID: 4

VLAN NAME: Test

Port Egress

--------------

1[ UNTAGGED ]

2 [ TAGGED ]

3[ NO ]

4[ TAGGED ]

5 [ TAGGED ]

6 [ TAGGED ]

7 [ UNTAGGED ]

8 [ UNTAGGED ]

Port Egress

--------------

9[ UNTAGGED ]

10 [ UNTAGGED ]

11 [ UNTAGGED ]

12 [ TAGGED ]

13[ NO ]

14[ TAGGED ]

15[ TAGGED ]

16[ TAGGED ]

Port

Egress

Port

Egress

----

----------

----

----------

17

[ UNTAGGED ]

25

[ UNTAGGED ]

18

[ TAGGED ]

26

[ UNTAGGED ]

19

[ NO ]

27

[ TAGGED ]

20[ TAGGED ]

21[ TAGGED ]

22[ TAGGED ]

23[ UNTAGGED ]

24[ UNTAGGED ]

SET ALL PORTS:

SAVE

NEXT

PREVIOUS

[UNTAGGED]

EXITRETURN

30691_34

802.1Q VLAN Configuration Menu Screens 7-11

Page 199
Image 199
Enterasys Networks 2H258, 2E253, 2H253, 2H252 manual Static Vlan Egress Configuration Screen