Enterasys Networks 2H258, 2E253, 2H253 See which ports are set to the PID/Classification indicated

Protocol Port Configuration Screen

Field Descriptions

Refer to Table 8-9for a functional description of each screen field.

Table 8-9 Protocol Port Configuration Screen Field Descriptions

Use this field… To…

Classification Rule See the Classification Rule (Priority, Classification, and Definition) of

(Read-Only)the line selected in the Priority Classification Configuration screen. For example, in Figure 8-8, the Classification Rule – 1, Ether II Type, 0x0800 (DOD IP) – was selected in the Priority Classification Configuration screen to access the Protocol Port Configuration screen. All ports with YES in the Classify columns would be those ports associated with PID 1 with an Ether II Type Classification. This causes Ether II Type frames received by those ports to be transmitted with a priority value of 1 and according to the Classification Precedence Rules.

Port	See the number of each port.
(Read-Only)
Classify	See which ports are set to the PID/Classification indicated in the
(Toggle)	Classification Rule field (see Figure 8-8). The Classify field toggles
	between YES and NO, which determines whether or not the associated
	port is set to the Classification Rule.
		NOTE: As each Classify field is highlighted, the Event Message
		Line (not shown) at the top of the screen indicates the port type.
		For example: Fast Ethernet Front Panel, FTM Backplane Port 3,
		and Gigabit Ethernet VHSIM.
		If a port cannot be configured, “NO” displays without brackets.

For details about assigning ports, refer to Section 8.7.1.

SET ALL PORTS Toggle between YES and NO. This determines whether or not all ports

(Toggle)will be assigned to the classification rule shown in the Classification Rule field. NO is the default. For details about setting all ports simultaneously, refer to Section 8.7.1.

802.1p Configuration Menu Screens 8-33