Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Ethernet Interface Configuration Screen

Models: 2H258 2E253 2H252 2H253

1 390
Download 390 pages 24.92 Kb
Page 132
Image 132

Ethernet Interface Configuration Screen

Table 5-1 Port Configuration Menu Screen Menu Item Descriptions (Continued)

Menu Item

Screen Function

 

 

SMARTTRUNK

Used to logically group interfaces together to permit aggregation of

CONFIGURATION

multiple links. This menu item appears when the Agg Mode field is set

 

to “HUNTGROUP” in the General Configuration screen. Refer to the

 

SmartTrunk User’s Guide for information about how to access and use

 

the SmartTrunk screens.

 

 

LINK

Used to logically group interfaces together to create a greater

AGGREGATION

bandwidth uplink according to the IEEE 802.3ad standard. This menu

MENU

item appears when the Agg Mode field is set to “IEEE8023ad” in the

 

General Configuration screen. Refer to the Section 5.8 for information

 

about how to access and use the SmartTrunk screens.

 

 

BROADCAST

Used to set a desired limit of received broadcast frames that are

SUPPRESSION

forwarded out other interfaces. For details, refer to Section 5.9.

CONFIGURATION

 

 

 

5.2ETHERNET INTERFACE CONFIGURATION SCREEN

When to Use

To display the link status and current operating mode of each Ethernet port. This screen also provides access to the Ethernet Port Configuration screen, which allows configuration of the Ethernet port.

In normal operation, all front panel ports automatically establish a link with the device at the other end of the segment without requiring user setup. However, the Ethernet Interface Configuration screen can be used to access the Ethernet Port Configuration screen to select a port and display its characteristics. The Ethernet Port Configuration screen is used to change the operating mode of the port and enable or disable the advertisement to another device. Refer to Section 5.3 for details.

How to Access

Use the arrow keys to highlight the ETHERNET INTERFACE CONFIGURATION menu item on the Port Configuration Menu screen and press ENTER. The Ethernet Interface Configuration screen, Figure 5-3, displays.

5-4Port Configuration Menu Screens

Page 132
Image 132
Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Ethernet Interface Configuration Screen