Enterasys Networks 2H253, 2E253, 2H252, 2H258 manual Vlan Port Configuration Screen

VLAN Port Configuration Screen

Field Descriptions

Refer to Table 7-5for a functional description of each screen field.

Table 7-5 Current VLAN Egress Configuration Screen Field Descriptions

Use this field…	To…
Port	See a list of the ports associated with the VLAN ID shown in the line
(Read-Only)	above the Port and Egress lists.
Egress	See the current egress setting (UNTAGGED, TAGGED, or NO) for
(Read-Only)	each port.

7.7VLAN PORT CONFIGURATION SCREEN

When to Use

To see and/or make changes to the port parameters affecting

•the Port VLAN Identification (PVID) to reassign the port to a different PVID,

•the acceptable frame type that the port will transmit or receive frames of VLANs other than the static VLANs created on the switch,

•the ingress filtering on the port, which can be enabled or disabled to filter out (drop) frames that are not on the switch Egress list, or

•the GARP VLAN Registration Protocol (GVRP) status, which can be enabled or disabled.

How to Access

Use the arrow keys to highlight the VLAN PORT CONFIGURATION menu item on the 802.1Q Configuration Menu screen and press ENTER. The VLAN Port Configuration screen, Figure 7-7, displays.

802.1Q VLAN Configuration Menu Screens 7-17