Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual Field Descriptions, Egress

Static VLAN Egress Configuration Screen

Field Descriptions

Refer to Table 7-3for a functional description of each screen field.

Table 7-3 Static VLAN Egress Configuration Screen Field Descriptions

Use this field…	To…
VLAN ID	See the VLAN ID of the VLAN selected in the Static VLAN
(Read-Only)	Configuration screen.
FDB ID	See the Filter Database ID (FDB ID) number associated with the
(Read-Only)	VLAN ID.
VLAN Name	See the VLAN Name associated with the VLAN ID.
(Read-Only)
Port	See a list of ports associated with the VLAN ID. Up to 32 ports may be
(Read-Only)	listed on the screen. If more than 32 ports are associated with a
	VLAN ID, the NEXT command is displayed to step to the next screen.
Egress	Select the type of VLAN frame transmission (egress) for each port.
(Selectable)	You can select UNTAGGED, TAGGED or NO using the SPACE bar.
	UNTAGGED – the port will only transmit the VLAN frames as
	untagged.
	TAGGED – the port will only transmit the VLAN frames as tagged.
	NO – the port is removed from the VLAN Egress List, so that the port
	will not transmit the VLAN frames.
	If NO appears without brackets and not in bold type, the port setting
	cannot be changed directly using this screen, but has virtual ports such
	as that of a physical ATM port (i.e., an ATM physical port can have
	more than one virtual port, which can be configured using its own local
	management).
	Initially, the default setting is UNTAGGED.
	When a new VLAN is created, the default setting is NO on all ports.
SET ALL PORTS	Set all ports to the same setting. You can select UNTAGGED,
(Selectable)	TAGGED, or NO, using the SPACE bar.
	The default setting is UNTAGGED.

7-12802.1Q VLAN Configuration Menu Screens