Enterasys Networks 2H258, 2E253, 2H253, 2H252 manual Configuring the Port Parameters

Quick VLAN Walkthrough

Figure 12-8 Walkthrough Stage Three, Port 10 Egress Setting

VLAN ID: 2			FDB ID: 2	VLAN NAME: Test
Port		Egress	Port	Egress	Port	Egress	Port	Egress
----		----------	----	----------	----	----------	----	----------
1		[ NO ]	9	[ NO ]	17	[ NO ]	25	[ NO ]
2		[ NO ]	10	[ TAGGED ]	18	[ NO ]	26	[ NO ]
3	[UNTAGGED ]		11	[ NO ]	19	[ NO ]	27	[ NO ]
4		[ NO ]	12	[ NO ]	20	[ NO ]
5		[ NO ]	13	[ NO ]	21	[ NO ]
6		[ NO ]	14	[ NO ]	22	[ NO ]
7		[ NO ]	15	[ NO ]	23	[ NO ]
8		[ NO ]	16	[ NO ]	24	[ NO ]
				SET ALL PORTS:	[UNTAGGED]
SAVE						EXIT		RETURN

30691_65

Configuring the Port Parameters

Now that the TEST VLAN and the trunk connection are set up, we can proceed to set the port parameters for ports 3 and 10, as follows:

1.On the 802.1Q Configuration Menu screen, use the arrow keys to highlight the VLAN PORT CONFIGURATION menu item and press ENTER. The VLAN Port Configuration screen, Figure 12-9, displays.

2.Use the arrow keys to highlight the PVID field for Port 3.

3.Type in 2, which is the VLAN ID of the Test VLAN. This will associate Port 3 with the VLAN ID, thus making the port PVID of 2.

NOTE: Since Port 3 will connect to a single workstation, and is not to be used for switch-to-switch communications, the acceptable frame types allowed through this port will be all frame types (tagged and untagged). Since Port 3 will not receive VLAN frames from the work station, it is not necessary to filter frames.

4.Use the arrow keys to highlight the Acceptable Frame Types field for Port 3.

5.Use the SPACE bar to step to ADMIT ALL FRAMES.

6.Leave the INGRESS FILTERING field for Port 3 in the default setting of DISABLED. This prevents frames from being filtered out according to the Port VLAN List.

VLAN Operation and Network Applications 12-19