Enterasys Networks 2H252, 2E253, 2H253, 2H258 Deleting a Static Vlan, Paging Through the Vlan List

Static VLAN Configuration Screen

7.3.4Deleting a Static VLAN

To delete a VLAN from the VLAN list, proceed as follows:

1.Use the arrow keys to highlight the line containing the VLAN ID, FDB ID, and VLAN Name information. The following message is displayed at the top of the screen:

“Hit <RETURN> key to edit port list, or <M> to mark.”

NOTE: The default VLAN cannot be deleted from the list.

2.Press the M (not case sensitive) key, and an asterisk (*) appears to the left of the highlighted line.

If more than one VLAN is to be deleted, repeat steps 1 and 2 to highlight and mark each line. Otherwise, go to step 4.

NOTE: If for some reason you want to remove a mark, perform steps 1 and 2 to mark the line. Then press M to delete the mark.

3.After the lines are marked, use the arrow keys to highlight the DEL MARKED command.

4.Press ENTER. The VLANs and marked line items are deleted from the list.

7.3.5Paging Through the VLAN List

To display additional VLANs that do not display in the current VLAN List as shown on the screen, use the NEXT or PREVIOUS commands located at the bottom of the screen, as follows:

NOTE: The NEXT and PREVIOUS fields will only display if there are further VLAN List entries to page through.

1.To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the entries on the next screen.

2.To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to view the entries on the previous screen.

7-10802.1Q VLAN Configuration Menu Screens