Protocol Port Configuration Screen

Table 7-10 Protocol Port Configuration Screen Field Descriptions (Continued)

Use this field …

To …

 

 

SET PORTS TO

Add the VLAN and classification shown in the Classification Rule

VLAN

field to the Port VLAN List of all ports set to YES. The SET PORTS

FORWARDING

TO VLAN FORWARDING field toggles between NO and YES with

(Toggle)

NO as the default setting. YES adds all the ports set to YES to the

 

VLAN Forwarding list of the SmartSwitch device.

 

 

7.9.1Assigning Ports to a VID/Classification

The following procedures describe how to

assign one or more ports to a Classification Rule,

set all ports simultaneously to a Classification Rule, or

enable all selected ports to forward frames with the Classification Rule by adding that Classification Rule to the Port VLAN List of each port.

Assigning One or More Ports Individually

1.Use the arrow keys to highlight the Classify field adjacent to the Port number.

2.Press the SPACE bar to toggle the Classify field to YES or NO. YES assigns the port to the VID/Classification shown in the Classification Rule field. NO removes the port from the Classification Rule.

3.If more than one port is to be added to the Classification Rule, repeat the first two steps for each port.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

5.Press ENTER. The message “SAVED OK” displays and the settings are saved.

Assigning All Ports Simultaneously

1.Use the arrow keys to highlight the SET ALL PORTS command field.

2.Press the SPACE bar to toggle the SET ALL PORTS field to YES or NO and press ENTER. YES will set all the ports to the VID/Classification shown in the Classification Rule field. NO will remove all ports from the Classification Rule.

3.Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4.Press ENTER. The message “SAVED OK” displays and the setting is saved.

802.1Q VLAN Configuration Menu Screens 7-37

Page 225
Image 225
Enterasys Networks 2H253 Assigning Ports to a VID/Classification, Assigning One or More Ports Individually, SET Ports to