Enterasys Networks 2H252, 2E253, 2H253, 2H258 manual Policy Pvid, Override is

VLAN Port Configuration Screen

Screen Example

Figure 7-7 VLAN Port Configuration Screen

Policy PVID Override is 2

Global GVRP State [ ENABLED ]

Port PVID Port Mode

–––––– ––––––––––––––

1	1	[HYBRID]
2	1	[HYBRID]
3	1	[1D TRUNK]
4	1	[HYBRID]
5	1	[HYBRID]
6	1	[HYBRID]
7	1	[HYBRID]
8	1	[HYBRID]
9	1	[HYBRID]
10	1	[1Q TRUNK]
11	1	[HYBRID]
12	1	[HYBRID]

			Ingress		GVRP
	Acceptable Frame Types		Filtering		Status
–––––––––––––––––––––			––––––––––––––		––––––––––––––
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[ADMIT TAGGED FRAMES ONLY] [ DISABLED				]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]
[	ADMIT ALL FRAMES	]	[ DISABLED	]	[ ENABLED	]

SAVE NEXT PREVIOUS EXIT

RETURN

36502_05

Field Descriptions

Refer to Table 7-6for a functional description of each screen field.

Table 7-6 VLAN Port Configuration Screen Field Descriptions

Use this field…	To…
Policy PVID	See the active override to a port as a result of an application policy.
Override is	When a port number has an asterisk next to it, selecting that Port field
(Read-Only)	will cause this field to display with the application policy number.
	There are two sources of an override; 1) default policy, and 2)
	authentication policy.
	Authentication using 802.1X is not possible on a port in this mode.
	In Figure 7-7, the override shown is 2.

7-18802.1Q VLAN Configuration Menu Screens