Enterasys Networks 2E253, 2H253, 2H252, 2H258 manual 18802.1p Configuration Menu Screens

Priority Classification Configuration Screen

Table 8-6 Priority Classification Configuration Screen Field Descriptions (Continued)

Use this field …	To…
PID	Enter the priority value that will be associated with the classification
– bottom of screen	selected in the Classification field. A PID from 0 to 7 may be typed
(Modifiable)	into the field, where 0 is the lowest priority and 7 is the highest priority.
	For details on how to enter the PID/Classification, refer to
	Section 8.6.4.
Classification	Select the classification that will be associated with the priority
– bottom of screen	selected in the PID field. Depending on the classification selected,
(Selectable)	there can be up to three fields involved (CLASSIFICATION,
	IP ADDRESS, and MASK). At the time of this printing, the selections
	available in each field are listed in Table 8-7.
		NOTE: Besides the PID selected, the order in which a frame is
		transmitted also depends on the Classification Precedence
		Rules discussed in Section 8.6.1. These rules come into effect
		when there are multiple classifications configured in the
		SmartSwitch device.
	For details on how to use the Priority Classification Configuration
	screen to select the classification rule, refer to Section 8.6.4.
ADD	Add the current Classification Rule (PID and Classification selections)
(Toggle)	to the screen. For details about how to add an entry, refer to
	Section 8.6.4.
DEL ALL/DEL	Delete all or one or more marked entries, simultaneously. The DEL
MARKED	ALL command is the default and it is used to simultaneously delete all
(Toggle)	the configured information Classification Rules. The DEL MARKED
	command appears in place of the DEL ALL command when one or
	more lines are marked for deletion. For details on using the two
	commands, refer to Section 8.6.5.

8-18802.1p Configuration Menu Screens