NAMES AND FUNCTIONS OF PARTS

!2REC OUT Button

This button turns the signals output from the RECORDER 1 and 2 OUT jacks on the rear panel ON and OFF. When output is ON, the center of the button is lit a blue color. For instructions on how to record, see “RECORDING” on pg. 15.

When RECORDER 1 is selected as the input source, sig- nals are not output to the RECORDER 1 OUT jack. The same goes for the RECORDER 2 OUT jack when RE- CORDER 2 is selected as the input source.

!3PHONO MC Button

This button switches the phono equalizer between MC and

MM.When MC is set, the center of the button is lit a blue color. Set the phono equalizer amplifier according to the type of cartridge you use.

!4Illumination Lamp

The side illumination casts a blue light over switches and buttons. It can be turned ON and OFF from the DISPLAY button. For instructions on how to operate the side illumi- nation, see “HOW TO OPERATE THE ILLUMINATION LAMP” on pg. 17.

ENGLISH

DISPLAY

Volume Level Indication

Max

OPERATE

0.5 dB steps

Turn the VOLUME knob on the PM-15S1 to the right or press the VOLUME 3 button on the remote controller.

!5Power Indicator

This indicator is lit a blue color while power to the PM- 15S1 is ON.

!6Display Panel

Approximately 3 seconds after power to the PM-15S1 is activated, the ID set for the PM-15S1 is displayed here.

After that, the top line displays the input source, while the bottom line displays the volume level. The vol- ume level is displayed as an attenu- ation level (dB).

Turn the VOLUME knob on the PM-15S1 to the left or press the VOLUME 4 button on the remote controller.

Min

The display panel also displays left-right volume level bal- ance. For instructions on how to trim volume level, see “TRIMMING” on pg. 18.

The display panel also displays messages in response to PM-15S1 operation.

!7OPERATE Indicator

This indicator indicates the operating status of the PM- 15S1. When the ID is set to “0” for standalone operation, it is lit a red color. When multiple PM-15S1s are connected by FCBS, only the OPERATE indicator of the master PM- 15S1 (ID 1) lights a red color. Slave PM-15S1s whose OPERATE indicator does not light a red color cannot be used to operate other units in sync. For more information on the FCBS, see “ABOUT FCBS” on pg. 16.

9

Page 12 Page 14
Page 13
Image 13
Marantz PM-15S1 manual Display, Names and Functions of Parts
Page 12 Page 14

PM-15S1 specifications

The Marantz PM-15S1 is a high-performance integrated amplifier that stands as a testament to Marantz’s commitment to audio excellence. Known for its sophisticated design and robust capabilities, this model has garnered acclaim among audiophiles and casual listeners alike.

One of the standout features of the PM-15S1 is its high current capability, which ensures that it can drive a wide range of speakers with ease. This amplifier is designed with a unique power supply that incorporates a massive toroidal transformer and high-quality filtering capacitors. This configuration provides steady and clean power, allowing for dynamic sound reproduction without distortion, making the PM-15S1 suitable for various musical genres.

The heart of the PM-15S1 lies in its advanced amplification technology. It employs a fully discrete current feedback circuit that has been meticulously crafted to deliver a natural and transparent sound. This circuit configuration minimizes signal degradation, allowing for precise audio playback that is faithful to the original recording. Additionally, the amplifier features a high-speed, high-current output stage that enhances its performance, particularly in reproducing intricate musical passages.

One significant characteristic of the PM-15S1 is its versatility. Equipped with multiple input options, including balanced XLR and unbalanced RCA connectors, users can easily integrate various audio sources. The amplifier also features a built-in phono stage, accommodating both moving magnet and moving coil cartridges, which is a boon for vinyl enthusiasts.

The construction of the PM-15S1 reflects Marantz’s dedication to quality. The amplifier is housed in a meticulously crafted chassis that reduces vibration and interference, ensuring that the audio signal remains pure. Its elegant design, complemented by luxurious finishes, makes it an attractive addition to any audio setup.

Another essential aspect of the PM-15S1 is its user-friendly interface. The front panel includes intuitive controls for volume, balance, and source selection, allowing for a straightforward user experience.

In conclusion, the Marantz PM-15S1 integrated amplifier is a remarkable piece of audio engineering that combines cutting-edge technologies with superior sound quality. Its robust features and sophisticated design make it a perfect choice for those who seek an enriching listening experience, whether it be for casual listening or critical sound reproduction.
Top Page Image Contents