![](/images/new-backgrounds/1018225/1822551x1.webp)
ENGLISH
TROUBLESHOOTING
7Error Messages
When multiple
| Error | Meaning | What to do |
| message | ||
|
|
|
|
1 | ERROR 02 | ID 2 is used with |
|
|
| more than one amp. |
|
|
|
|
|
2 | ERROR 03 | ID 3 is used with | Set separate ID |
|
| more than one amp. | numbers for each amp. |
3 | ERROR 04 | ID 4 is used with |
|
|
| more than one amp. |
|
|
|
|
|
4 | ERROR 11 | Amps of IDs 2 - 4 | If power to ID 1 amp is |
|
| cannot communi- | OFF, activate power. |
|
| cate with ID 1 amp. | Check remote cable is |
|
|
| properly connected. |
|
|
|
|
5 | ERROR 12 | ID 1 amp cannot | If ID 1 is used for more |
|
| communicate with | than one amp, properly |
|
| amps of IDs 2 - 4. | set ID numbers. Check |
|
|
| remote cable is properly |
|
|
| connected. |
|
|
|
|
OTHERS
The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment.
7Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.g., lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these wil mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment get dirty, wipe the external surfaces with a soft,
If the equipment becomes heavily soiled:
•dilute some washing up liquid in water, in a ratio of one part detergent to six parts water.
•dip a soft, lint free in the solution and wring the it is damp.
•wipe the equipment with the damp cloth.
•dry the equipment by wiping it with a dry cloth.
7Repairs
Only the most competent and qualified service technicians should be allowed to service the
22