Kenmore 795.6900, 795.7900 manual Refrigerator Shelves, Sliding Out Shelves optional on some models

Models: 795.76200 795.7809 795.7827 795.6827 795.6900 795.7900

1 41
Download 41 pages 63.7 Kb
Page 25
Image 25
REFRIGERATOR SHELVES

REFRIGERATOR SHELVES

The shelves in your refrigerator are adjustable to meet

your individual storage needs. These units are all glass shelves.

Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier; it will also reduce the amount of time the refrigerator door is open, saving energy.

IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, glass shelves are made with tempered glass, which will shatter into small pebble- sized pieces.

NOTE: Glass shelves are heavy. Use special care when removing them to avoid dropping them.

Adjusting Shelves

Remove shelves from the shipping position and replace shelves in the position you want.

To remove a shelf : Tilt up the front of the shelf in the

direction of (1) and lift it in the direction of (2). Pull the shelf out.

To replace a shelf : Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height.

Then lower the front of the shelf so that the hooks drop into the slots.

NOTE: Make sure that shelves are level from one side to

the other. Failure to do so may result in the shelf falling or spilling food.

Sliding Out Shelves (optional on some models)

You can slide some glass shelves in and out of your refrigerator as follows.

To slide the shelf out, carefully pull front of shelf toward you.

To slide shelf in, push shelf in until it stops.

To remove a sliding shelf from its metal frame:

1.Pull the shelf out to the stop position.

2.Tilt the front of the shelf up and pull it past the stop position.

3.Lift up the shelf to remove.

To replace shelf:

1.With front of shelf tilted up, place rear of shelf onto brackets at point past stop position.

2.Slide shelf fully back. 3. Lower front of shelf into place.

Convenience Shelves (optional on some models)

Folding Shelf: You can store taller items such as gallon containers or bottles by simply sliding the shelf back.

25

Page 25
Image 25
Kenmore 795.6900, 795.7900, 795.6827, 795.7827, 795.7809 Refrigerator Shelves, Sliding Out Shelves optional on some models