•Change the Hinge Pin from the right side to left side.
After
Fig. 77
•Put freezer door down over the Bottom Hinge Pin on the Bottom Hinge Bracket.
•Reattach Middle Hinge Pin using a 1/4" socket wrench. Replace washer.
•Put refrigerator door down over the Hinge Pin on the Middle Hinge Pin Bracket.
Mille Hinge Bracket
•Line up Top Hinge with holes in top of refrigerator. Use the 3 bolts to replace the Hinge.
Fig, 79
Top Hinge
Top Hinge
•Tighten Bolts.
Fig, 80
The keyhole slots on the back of the handle allow the handle to separate from the mounting screws.
•Use an adjustable wrench to remove the 2 handle mounting screws.
To avoid scratching the door. Do not remove the plug buttons by prying with a screwdriver.
•Unscrew the buttons with your fingers by rotating counterclockwise; they will loosen and fall free.
• Install the plug buttons on the left side.
Plug
Fig. 84
• Install the handle mounting screws on the right side.
HOW TO REVERSE DOOR HANDLE
NOTE: To assist in installing the handle on the right side, place a small piece of masking tape near the
top of the handle before | removing. |
|
|
|
• Grasp the handle tightly | with both hands | and slide the | Fig. 85 | Handle Mounting |
handle up (this may require some force). |
| screws | ||
| 2O |
| ||
