Kenmore 795.76200 Refrigerator Doors For Freezer Swing Models, 10mm or 13/32-inch socket wrench

Place freezer door down on Bottom Hinge Pin.

Bottom Hinge '_

Fig. 52

• Reattach Middle Hinge Pin. Replace washer.

Pin

•Put refrigerator door down over the Hinge Pin on the Middle Hinge Pin Bracket.

Fig. 54

Middle Hinge

•Line up Top Hinge with holes in top of refrigerator. Use the 3 bolts to replace the Hinge.

Fig. 55

Top Hinge

•Tighten Bolts. Force-fit Top Hinge Cover over top Hinge.

Fig. 56

REMOVING,REVERSING AND REPLACING

REFRIGERATOR DOORS (For Freezer Swing Models)

ELECTRICAL SHOCK HAZARD

Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to

do so could result in death or serious injury.

Remove food and any Adjustable Door or Utility Bins from doors. Failure to do so could result in serious

injury.

You may find it more convenient to have the doors converted from the left-opening type (factory installed) to the right-opening type. Directions refer to the right side as the side on your right as you face the unit.

TOOLS NEEDED

•10mm or 13/32-inch socket wrench

(with 2-inch extension for bottom door hinge)

•No. 2 Phillips head screwdriver

•1/4inch socket wrench

•Flat-headscrewdriver for prying

•Adjustable wrench

•Gently pry off the Top Hinge Cover with a flat head screwdriver and remove.

Fig. 57

•Using 10mm or 13/32-inch socket wrench, remove the 3 bolts and lift off the Top Hinge. Set parts aside.

Fig. 58

Top Hinge

•Lift up refrigerator door slightly and remove it. Fig. 59

Middle Hin(

17