ELECTRICAL SHOCK HAZARD

Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box. Failure to do so could result in death or serious injury.

Remove food and any Adjustable Door or Utility Bins from doors. Failure to do so could result in serious injury.

Remove washer and set aside.

Use a 10mm or 13/32 inch socket wrench to remove

the 2 bolts in Middle Hinge Bracket. Remove

screws. Set Middle Hinge Bracket and other parts aside.

(For Freezer Drawer Models)

If entrance is less than 35-inches wide, the refrigerator door and freezer drawer will need to be removed.

TOOLS NEEDED:

• 10mm or 13/32-inch socket wrench

(with 2-inch extension for bottom door hinge) ° No. 2 Phillips head screwdriver

Flat-head screwdriver for prying

Adjustable wrench

Before removing the doors, remove the Base Grille.

See BASE GRILLE INSTALLATION for reference.

HOW TO REMOVE REFRIGERATOR DOOR

Gently pry off the Top Hinge Cover with a flat head screwdriver and remove.

J

Fig. 1

____

Using 10mm or 13/32-inch socket wrench, remove the 3 bolts and lift off the Top Hinge. Set parts aside.

Fig. 2

Top Hinge

Lift up door slightly and remove it. Place door on a non scratching surface.

Fig. 3

Middle Hinge

HOW TO REMOVE PULL OUT DRAWER

IMPORTANT: To avoid possible injury, product or property damage, you will need two people to perform the following instructions.

Pull the drawer open to full lower extension. Remove durabase by lifting it from rail system.

Fig. 5

Durabase

Press both hangers with your thumbs to lift it up. Fig. 6

Separate the left and right rail cover Fig. 7

10

Page 10
Image 10
Kenmore 795.7809, 795.7900 manual For Freezer Drawer Models, HOW to Remove Refrigerator Door, HOW to Remove Pull OUT Drawer