Kenmore 795.76200 a,,ta es Top, ql . ,jOoor FigIOz. MI supports, Replacing Refrigerator Door

•Remove the screws of the rail on both sides. Fig. 8

REPLACING REFRIGERATOR DOOR

•Reattach Middle Hinge Bracket with the previously removed 2 bolts and 2 screws.

screw

[] CAUTION:When removing drawer door, do not hold it by

the handle. Door could fall down and you may be injured. Grasp door with both hands as pictured below when

-Screws

(2)

Fig. 13

removing.

[] CAUTION: When laying down the drawer, be careful not to damage the floor or hurt your feet with the sharp edges on hinge side.

•With both hands, hold both sides of the door and pull it up to separate it from the rails.

•Put refrigerator door down over the Hinge Pin on the Middle Hinge Pin Bracket.

Fig. 14

Middle Hinge

Fig. 9 _ ::i

• Line up Top Hinge with holes in top of refrigerator. Use the 3 bolts to replace the Hinge.

ql . ,jOoor

FigIOz. MI supports

Fig. 15

a,,ta es Top

•Push rails back into drawer cavity. With both hands, hold the center of the bar and push it in so that both rails go back simultaneously.

Fig. 11

•Tighten Bolts. Force-fit Top Hinge Cover over top Hinge.

Fig. 16

11