Advanced Navigation Controls
Tips on Playback Sequence of Disc
¥ Check that the mp3/WMA disc is created with a single folder structure. Refer to the diagram below for playback sequence details on
¥For example, the folders and songs from level 2 are played before moving to play folders and songs from level 3.
¥Folder playback sequence is indicated by the letters A to G.
¥Song playback sequence is indicated by the numbers (1 to 15) in front of the song name.
Troubleshooting Tips
Unit will not turn on
¥Check the power cord for a secure connection.
¥Unplug the unit for a moment, and then plug into power source again.
¥Check the outlet by plugging in another device.
No sound
¥ | Increase the volume setting. |
¥ | Check the connection to speakers. |
¥ | Check that you have selected the |
CD sound skips |
|
¥ Clean the disc. | EN |
¥Check the disc for warping, scratches, or other damage.
¥Check if something is causing the unit to vibrate. If so, move the unit.
¥Make sure the speakers are at least 3 feet away or on a different surface from the main unit.
CD button will not respond, or does not change discs when you press DISC SKIP
LEVEL 1
A
Folder 1
B
Folder 2
C
Folder 3
LEVEL 2
D
Folder 1.1
E
Folder 1.2
F
Folder 2.1
3Song 2.2
4 Song 2.3
5 Song 2.4
6Song 3.1
7 Song 3.2
LEVEL 3
8Song 1.1.1
9 Song 1.1.2
10 Song 1.1.3
G
Folder 1.2.1
11Song 2.1.1
12Song 2.1.2
LEVEL 4
13Song 1.2.1.1
14Song 1.2.1.2
15Song 1.2.1.3
| appropriate function: CD, Tuner. |
¥ | Make sure the mute is off. |
¥ | Make sure the headphones are not |
| plugged in. |
Poor radio reception
¥Check the antenna connection.
¥Move antenna.
¥Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave and fluorescent lights.
CD does not play
¥Check that the CD is in the tray.
¥Check that the CD label is facing up.
¥Check that PAUSE mode is not on.
¥Check that the CD function is selected.
¥Use the CD lens cleaner.
¥Clean the disc.
¥Try another CD.
¥Switch to another function (Tuner) and then back to CD.
Remote control does not work
¥Check that the batteries are properly installed.
¥Replace any weak batteries.
¥Check the unit is plugged into power source.
¥Point the remote directly at the unitÕs front panel.
¥Move closer to the unit.
¥Remove any obstacles between the remote and the unit.
1Song 4
2 Song 5
21 | 22 |