RCA RS2135i user manual USB Playback, Radio, CD and mp3 Disc Playback

CD and mp3 Disc Playback

Fast Forwarding/Reversing/ Skipping Tracks

¥Press and hold / to fast forward or reverse through a CD while it is playing.

¥Press / to skip to the previous or next track.

Program Playback

Refer to page 18 for details.

Notes:

¥ Be sure to remove all discs from the disc tray before moving or

transporting the unit.

¥	Do not force the tray to close during
	CD playback or tray opening.
¥	File formats/bitrates supported by
	the player:
	mp3: 32 to 320kbps

Important CD and mp3/wma Information

Notes on CD-R/RW Disc:

¥Some CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.

¥Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/ RW disc as this may result in the unit malfunctioning.

¥To avoid damages to the CD-R/RW disc, do not open the disc tray door while the disc is being read.

¥Do not load an unrecorded CD-R/RW disc into the unit. This may take a longer time to read the disc.

¥Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc.

USB Playback

Connecting USB drive to the Main Unit

Insert the USB drive's connector into the main unitÕs USB Jack on the front panel.

To disconnect, unplug the drive.

Selecting USB Mode

Press SOURCE repeatedly to select USB mode.

USB Playback Features

Start and Pause Playback

Press to start and pause playback.

Stop Playback

Press to stop playback. The unit enters the navigation mode for 10 seconds before entering the stop mode.

Skipping Files/Fast Forwarding/Reversing

¥ Press	/	to skip to the previous or	EN
next file.

¥Press and hold / to fast forward or reverse through a file while it is playing.

Memory Usage

Press BAND/INFO on the main unit or INFO on the remote control to view memory usage on the USB drive.

Note: Mass Storage Class (MSC) USB

devices of up to 20 GB are compatible with this unit. Do not

connect other USB devices to this unit.

wma: 48 to 160kbps

Notes on mp3/WMA Disc:

¥Use .mp3 as the extension when converting audio files into mp3 for saving onto CD-R(W) or CD-ROM, e.g. Abc08.mp3. Do not use any other extension e.g. .doc,

.pdf.

¥Do not use the .mp3 extension for other text or non-audio data files as this may result in serious malfunction and harmful noise interference.

¥For better quality mp3/WMA disc playback, the CD quality should be recorded at 128kbps or 64kpbs.

¥Disc data size > 650MB is not recommended.

¥Total files and folders in the disc should not exceed 250, it also depends on the length of the file/folder names.

¥For mixed mode discs, only one mode will be selected for playback depending on the recording format.

¥To ensure good performance, wait until the disc changer completely reads the disc before proceeding.

¥mp3 files in CD ROM EXTRA format disc are not recognized.

Radio

Selecting Tuner Mode

Press SOURCE to enter Tuner mode.

Selecting Tuner Band

In Tuner mode, press BAND to select between FM and AM radio bands.

Tune Mode and Preset Mode

The tuner can be in either TUNE or PRESET mode.

¥To select between TUNE and PRESET mode, press TUNE/PRESET .

¥In PRESET mode, "P XX" will be displayed where "XX" represents the preset number (1-32).

Tune Mode

In TUNE mode, you can press / to select desired frequencies.

¥Press / to select frequencies.

¥Press and hold / to scan frequencies.

Preset Mode

In PRESET mode, the unit can store up to 32 radio stations in its memory. You can program the presets in two ways:

¥Manual setting by entering every single radio station yourself.

¥Perform Auto Preset Programming and the unit can store all available radio stations automatically in ascending order.

Manually Setting Presets

1.Press TUNE/PRESET to enter TUNE mode.

2.Press / to adjust the desired frequency.

3.Press PROG once and the most recently accessed program location flashes on the display.

4.If a different program location is

preferred, press / to move to the desired preset number (1-32).

5.Press PROG to store the selected frequency at that preset.

13 14